• Pick an open area, free of sticks and stones that may puncture the floor of the tent.

Setting up the Alaknak Tents

  • Pick an open area free of sticks, rocks and debris that might puncture the floor of the tent.
  • Gather the 4 bags (tent, poles, stakes, ropes)
  • Unroll the tent
  • Spread the tent out by grabbing the 4 corners and pulling them tight
  • Stake the 4 corners (use the outermost blue loops)
  • Place all poles next to the tent, each in the general location of where they will be installed
  • On the large tent, install the exterior center pole with large plastic clips
  • Install each of the 4 corner posts with 2 ropes and 2 stakes on each post (at a 90 degree angle)
  • Install each of the other posts with 1 rope and 1 stake (make sure the posts are vertical)
  • On the large tent, now is a good time to make sure that it is properly installed and secured with 1 rope and 1 stake on each side
  • Carefully install interior circus pole(s) (1 on small tent, two on large tent) placing the pole in the areas reinforced to support the pole
  • Install the poles in each door, securing each door with 2 white ropes and 2 stakes.
  • Secure the exterior window vent flaps with s-clips to the support ropes
  • Stand back and adjust ropes so that the tent “looks set-up right”.
  • **IMPORTANT** If the door screens look stressed, release some of the tension on the corner poles.  The zippers should open and close easily without pulling the screens.
  • Stake the base of each pole and confirm that the pins are inserted into the bottom of each pole.
  • Now enjoy your camping experience.